building a deck with tongue and groove flooring

The deck boards themselves are tongue and groove planks, but they also have to be pre drilled on the tongue side before each is secured with long stainless steel screws. About every four rows, we're adding spacers between the boards. Even as dense as ipê is, it will expand and contract at least some, and this space will 

Aside from the tongue and groove decking kit, you will need to have a few everyday tools and a basic knowledge of DIY will help you a lot. Step 1 Preparing the Decking. Assuming you have a simple rectangular area which you are going to apply the decking to, simply cut all of the floor planks to the same length. Make sure 

Ensure the deck substructure is pitched away from the house to allow for adequate water runoff. We recommend a minimum pitch of a 1/4" per 10 ft. for proper drainage on Standard and Pregrooved decking. For Tongue and Groove decking, a more aggressive pitch is recommended. We highly recommend using a 1/4" per 

Totem Timber supplies trade quality products at great low prices to the Trade & DIY which are available to order in store, online or by phone. We provide a delivery service for all your needs.

The Video Come From: woodcompositedeck.com/ ,Have Different Type WPC Product Option. Wood Plastic flooring Advantages . Beautiful looking with appearan

For information pertaining to the protection of decks and porches, please visit SouthernPineDecks.com. Back to Top . What is the maximum span of Southern Pine radius edge decking? The maximum recommended joist spacing for installing Southern Pine tongue & groove porch flooring is 16 inches on center.

DIYNetwork.com experts give new life to a porch with easy to install flooring. Materials. felt paper; tongue and groove porch decking; nails. Show All Lock the boards into place, then face nail the first row of boards, then use a pneumatic flooring nailer to nail each nail into the tongue of the board. Space nails evenly.

For installation we suggest that you pre drill a hole on a 45 degree angle where the tongue and the face touch, you will see a slight v groove in this corner. Then, on that same 45 degree angle drive a trim head screw through the pre drilled hole, through the deck board into the floor joist. This sinking action will allow the next 

Although installing mahogany tongue and groove decking boards is similar to installing interior flooring boards, there are some key differences. You probably won't have a solid subfloor, which

Tongue and groove flooring is best installed perpendicular to the floor joists, whether inside a home or on a porch or deck. Porches usually do not have a solid subfloor, such as plywood, so the joists are clearly visible. Most porches are built with joists running parallel to the front of the house, so flooring 

There are a couple of extra steps I take for porch flooring that I usually do not take for deck floors. When installing tongue and groove or shiplap porch flooring, for example, I apply an exterior wood adhesive to the floor joists before fastening the boards, to help keep the flooring secured to the joist.

Properly installing your new KAYU tongue and groove flooring is extremely crucial for long lasting performance. Sealing Be mindful of excess Do not box in the deck underneath as the moisture underneath a boxed deck will be absorbed by the bottom side of the board. The sun and wind will dry the top 

The product has been kiln dried after treatment and must be kept dry before and during installation. The flooring should be primed with a porch enamel (not a water sealant as recommended for decks and fences) on both sides and edges before installation. Use only under covered porch, not for uncovered decks exposed to 

Before installing Econodek waterproof vinyl decking take a look at these deck building tips on how to properly build a deck and install deck flooring.

You can now fully enjoy the old tradition of relaxing on your porch with 's tongue and groove porch flooring. 100% American made; Solid core cellular PVC; Face dimension: 3⅛"; Will not split, crack, splinter, decay, or warp; Fade, mold, and stain resistant; Easy to install no pre drilling required; Boards available in